2018-2022 Toyota C-HR (ZGX10) MAXX Coilovers : Godspeed Project MMX3910-A

2018-2022 Toyota C-HR (ZGX10)  MAXX Coilovers : Godspeed Project MMX3910-A

Compatibility List:

    Compatible With Toyota C-HR (AX10) 2017 2018 2019 2020 2021 2022
    Full Length Adjustable, Independent Ride Height And Spring Tension Adjustment; Mono-Tube Shock With 40 Precise Levels of Damping Force Adjustment; Corresponds to Every Driving Scene From the Street To The Track
    Large Capacity 52mm Steel Shock Body With Anti-Corrosion Coating; Aluminum And Steel Hardware Accessories; SAE9252 Steel Performance Springs;
    Italian IP F.A. Made Shock Oil Provides High Viscosity Index To Withstand Intense Track Usage And Great For Everyday Driving.
    Shock Absorber Can Be Replaced When Worn Out, Replacement Parts Are Available.; Full 1-Year Limited Warranty From Date Of Purchase, Parts Only

Toyota C-HR (AX10) 18-22 MAXX Coilovers

Details:

p>The Godspeed Project MAXX coilover for Toyota C-HR (AX10) 2018-2021 is for the tuners that want a track oriented setup that also provides daily commute comfort. With 40 levels of damping valve adjustment, you can easily adjust from stiff to soft simply by twisting the knob. Featuring mono-tube design with large capacity 52 mm dia. JIS seamless carbon steel shock body filled with IP F.A. 5W damper oil with properly valved 44 mm internal pistons to endurance competitiveness on a track course or daily spirited driving on public road. Cold wound springs are made from high tensile SAE9252 steel to ensure durability. Vehicle ride heights are adjusted with lower brackets to offer maximum shock travel in order to provide comfort compared to lowering springs alone. Mostly billet aluminum hardware accessories are used for its weight saving property in order to reduced overall weight of the coil-over system yet remain durable. All parts are replaceable and most importantly shock absorbers can be rebuild for customization or simply purchase replacement cartridge without spending too much for complete new coil-over system. You will experience quicker response times, improved bump absorption and increase grip to increase the safety when pushing your car to the limit!

Features:

    40 precise levels of damper adjustment
    Mono-tube Design With Anodized Shock Body
    Lightweight aluminum shock components and T7075 forged aluminum / carbon steel brackets.
    52 mm carbon steel shock body with a 44 mm internal piston.
    Independent ride height and spring pre-load adjustments.
    Italian IP F.A made shock oil with a high viscosity index.
    Front camber adjustable plates are included(whereas applicable)

Prior to installation, verify all hardware and properly tighten and spring are preload suspension to10 mm.Our technical department is available to answer any other questions.

Additional Information:
Special Notes     No
Damping Levels     40-Level
Height Adjustment     Yes
Spring Rate(Front)     8 kg/mm (448 lbs/inch)
Spring Rate(Rear)     4.6 kg/mm (258 lbs/inch)
Spring Length(Front)     200 mm
Spring Length(Rear)     230 mm
Front Top Mount     Yes, Standard Type
Rear Top Mount     No, Reuse Factory
Spring Inner Diameter(Front)     62 mm (2.44 inch)
Spring Inner Diameter(Rear)     62 mm (2.44 inch)
Warranty Note     No