Full Length Adjustable, Independent Ride Height And Spring Tension Adjustment; Mono-Tube Shock With 40 Precise Levels of Damping Force Adjustment; Corresponds to Every Driving Scene From the Street To The Track
Large Capacity 52mm Steel Shock Body With Anti-Corrosion Coating; Aluminum And Steel Hardware Accessories; SAE9252 Steel Performance Springs
Italian IP F.A. Made Shock Oil Provides High Viscosity Index To Withstand Intense Track Usage And Great For Everyday Driving
Shock Absorber Can Be Replaced When Worn Out, Replacement Parts Are Available.; Full 1-Year Limited Warranty From Date Of Purchase, Parts Only
Reasonable priced coilover damper kit features precise 40 levels of damping adjustment, 44mm Internal Piston, full length adjustable, and aluminum parts.
Details:
The Godspeed Project MAXX coilover for 2009-2013 Infiniti FX35/FX37 (S15) AWD w/o CDC is for the tuners that want a track oriented setup that also provides daily commute comfort. With 40 levels of damping valve adjustment, you can easily adjust from stiff to soft simply by twisting the knob. Featuring mono-tube design with large capacity 52 mm dia. JIS seamless carbon steel shock body filled with IP F.A. 5W damper oil with properly valved 44 mm internal pistons to endurance competitiveness on a track course or daily spirited driving on public road. Cold wound springs are made from high tensile SAE9252 steel to ensure durability.
Vehicle ride heights are adjusted with lower brackets to offer maximum shock travel in order to provide comfort compared to lowering springs alone. Mostly billet aluminum hardware accessories are used for its weight saving property in order to reduced overall weight of the coil-over system yet remain durable. All parts are replaceable and most importantly shock absorbers can be rebuild for customization or simply purchase replacement cartridge without spending too much for complete new coil-over system. You will experience quicker response times, improved bump absorption and increase grip to increase the safety when pushing your car to the limit!
52 mm carbon steel shock body with a 44 mm internal piston.
Independent ride height and spring pre-load adjustments.
Italian IP F.A made shock oil with a high viscosity index.
Front camber adjustable plates are included (whereas applicable)
Additional Information:
Special Notes: Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.
Damping Levels: 40-Level
Height Adjustment: Yes
Spring Rate (Front): 16 kg/mm (896 lbs/inch)
Spring Rate (Rear): 12 kg/mm (672 lbs/inch)
Spring Length (Front): 180 mm
Spring Length (Rear): 260 mm
Front Top Mount: Yes, Standard Type
Rear Top Mount: Yes, Standard Type
Spring Inner Diameter (Front): 62 mm (2.44 inch)
Spring Inner Diameter (Rear): 62-98 mm (2.44-3.86 inch)
For all Godspeed products, warranty claims must follow the official process outlined by the manufacturer. Please download and complete the Godspeed Warranty Claim Form before submitting your request.
Godspeed Warranty Claim
Download the warranty claim form for Godspeed products.
