2010-2013 Camaro Anderson Composite Type-OE Dry Carbon Fiber Hood
$3,629.00 USD Save: $362.90 (10.00%) $3,266.10
2010 - 2015 Camaro Type-OE Dry Carbon Fiber Hood
MSRP $ 2,999.00
Type-OE DRY CARBON hood for 2010-2015 Chevrolet Camaro
*All dry carbon fiber products are matte finish
*Mounts with OE hardware
*All hoods require hood pins for safety reasons.
*Heat shield required
*Anderson Composites does not suggest re-installing gas shocks/dampers/struts
*The use of a hood prop rod is highly recommended
WARNING: California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
DISCLAIMER All carbon fiber and fiberglass hoods are going to be incompatible with OEM gas strut hood lifters that may be equipped on your vehicle. To use gas struts with a lightweight hood will require using lower weight rated lifters. Using OEM spec lifters can cause stress and cracking on a composite hood and will void the warranty on the item. We also highly recommend using hood pins with all composite hoods in addition with the stock style hood latch. They will act as a fail safe in the event of a latch failure. Composite hoods are much lighter than a metal hood and the latch is bonded in place opposed to being bolted or welded in on a steel hood. Installing a composite hood without hood pins is done so at your own risk. Driven By Style recommends Aero Catch brand locking style hood pins.
Body kits and aerodynamics products qualify for grouped shipping. You can select 1-3 body kit items such as front bumper, side skirts and rear bumper for a single shipping charge. Once you add a 4th item to cart it will recalculate and have you select a new shipping option for "oversized body kit".
**hoods, trunks and hatches are not available for bundled shipping.
|Parent Product Type||Body Kits Aerodynamics|
|Product Types||Carbon Fiber Hoods|
Aerodynamics Product Disclaimer
We want all consumers to know that there will always be minor sanding, shaving, cutting, and/or filling prior to installing FRP (fiberglass) parts. The primer and or gel coat finish must have every square millimeter completely sanded and other prep work will be required prior to painting.
Please see our paint & installation guides by clicking the links below.
Aerodynamics Basic Paint Preparation Process
Aerodynamics Advanced Paint and Installation Guide
Our customer guarantee is that you can return your item within 30 days of receipt for any reason as long as it is returned in new condition in the original packaging and you pay for all shipping charges; original shipping fees are non-refundable. Products are non-refundable if altered in any way. Products are non-refundable if they are returned damaged in any way so be sure to properly repackage and insure your return shipment. It is recommended that the part be installed by a professional body shop that has experience working with aftermarket fiberglass and urethane body kits. Paint and installation process will include but are not limited to sanding, shaving, cutting and filling. Extra fees usually will be incurred for proper fitment, prep work etc. Refunds will not be issued due to minor fitment issues. All parts are for off-road and show use only.
For any order that is requesting a return within 10 days of delivery no restocking fee is due.
For any order that is requesting a return 11-30 days after delivery will be subject to a 25% restocking fee.
Delivery Inspection Procedure
- **Oversized Freight Delivery Requires Inspection Upon Delivery (Tractor Trailer Shipments Only)
- **It is extremely important to follow these instructions exactly to ensure that your shipment will be covered by the damage insurance.
When the shipment arrives, please be sure to thoroughly inspect the box and its contents for any major damage to the parts. You must unpack the order and remove each item from the box to check for concealed damage. If you do find damage to any of the items, please physically write "Damaged" on the delivery bill. Do not write anything else other than "damaged" on the delivery bill as it can affect the outcome of a claim decision by the shipping company. You will then accept the shipment as is, and notify us immediately. We will ask for digital pictures to verify that damage has occurred as it will be needed for processing the claim. In the instance major damage has occurred, we will file a damage claim with the shipper and ship you new parts as soon as they are available.
**Please note that if a product is damaged in transit and it was not inspected at delivery and not noted so on the delivery bill, we will be unable to assist beyond that point. Once the customer signs the bill of laden the shipping company will not allow us to submit a claim on your behalf.
**For orders shipped to a body shop it is your responsibility to contact them prior to delivery to ensure they inspect it before signing for it. If your body shop signs for the package without inspecting its contents for concealed damage we will not be able to file a claim for you with the shipping company.
I agree that I will inspect the item at delivery and fully understand that if I do not inspect this item at delivery and unbox it at a later time to find concealed damage that I waive all rights to file a damage claim on the delivery insurance. I also fully understand that a damaged item cannot be returned for refund or store credit under any circumstances.