2007-2014 Ford Expedition K&N FIPK Intake Kit; w/ Intake Tube
Part Number: kn57-2575
Description: FIPK Intake Kit; w/ Intake Tube; CARB Exempt - CARB EO: D-269-37
Air Filter Color: Red
Air Filter Height: 6 in (152 mm)
Air Filter Material: Cotton Gauze
Air Filter Outlet Shape: Round
Clamp Material: Stainless Steel
Clamp Style: Regular
Clamps Included: 6
Couplers Included: 2
Estimated HorsePower Gain: 11.04 HP @ 4600 RPM
Horse Power Increase: 11 HP
Intake Pipe Color / Finish: Black
Product Style: 57 Series FIPK
TYPE: Gen II
Replacement Filter: RC-5173
Weight: 11.3 lb (5.1 kg)
Intake Pipe Material: High-Density Polyethylene
K&N Fuel Injection Performance Kits (FIPK's) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.
Guaranteed to Provide more HP and Increased Acceleration
Engineered to Specific Vehicle Design
Easy to Install, Usually in 90 minutes or less!
Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
Million Mile Limited Warranty
Replaces OEM Filter and Air Box
Air Filter is Washable and Reusable
Works with Original Equipment Manufacturer Computer Systems
Designed to use Factory Holes & Mounting Points Whenever Possible
Most are CARB Exempt and street legal in all 50 US States
For over 50 years, K&N has been an industry-leader in automotive filtration and technology—offering products to increase performance, protection, and longevity in thousands of vehicle applications for consumers worldwide.
In the early 1960s, two motorcycle racers, Ken Johnson and Norm McDonald (K&N), developed a ground-breaking new idea for an air filter—one that could perform under the demands of dusty, dirty off-road environments. After experimenting with numerous types of filter media, they discovered that an oiled cotton design allowed the filter to not only capture contaminants very efficiently, but also allowed it to be washed and reused, and the original K&N High-Flow Air Filter was born. Five decades later, K&N is still innovating industry-leading filtration technology, and offers outstanding protection for everything from top-fuel dragsters to commuter vehicles across the globe.
In addition to performance air filters, K&N® now manufactures a variety of other protection and performance products, including air intake systems, oil filters, fuel filters, cabin air filters, and home air filters, with a reputation for exceptional quality and customer service that millions of customers trust.
K&N has maintained active involvement in racing and motorsports throughout its history, and has sponsored championship-winning teams in most subdisciplines of motorsport. A long and storied racing heritage continues to contribute to the development of products for all types of vehicles and engines.
|Parent Product Type||Performance Upgrades|
|Product Types||Cold Air Intakes|
|Year||2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014|