1993-1998 Toyota Supra Jgt Carbon Fiber Hood

All hoods come equipped with stock hinge mounting points as well as an OEM style latch.

We suggest the use of hood pins for all fiberglass and composite hoods because these hoods are significantly lighter than stock. Although these hoods have an OEM style latch included it is bonded in during the manufacturing process with either resin or adhesive. A latch cannot be mechanically secured in a composite hood as it can be with a steel or aluminum hood. In the event the bonded in latch fails, the hood pins are a safe guard to protect the hood from flying open.

It is not required to use hood pins with a carbon fiber or fiberglass hood but it is a good idea.

FRP Products Detail:

All VIS fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass (***unless noted). All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.

CFRP Products Detail:

VIS Carbon Fiber Products are made from the finest carbon fiber available. Each piece is protected with a UV coating which allows it to hold its high gloss finish. VIS Carbon Fiber products have a tight carbon weave and use Grade-A carbon fiber only. Intended for OFF ROAD use only.

VIS Racing Product Guarantee

Our customer guarantee is that you can return your item within 30 days of receipt for any reason as long as it is returned in the original packaging and you pay for all shipping charges; original shipping fees are non-refundable. Products are non-refundable if altered in any way. It is recommended that the part be installed by a professional body shop that has experience working with aftermarket fiberglass and urethane body kits. Paint and installation process will include but are not limited to sanding, shaving, cutting and filling. Extra fees may be incurred for proper fitment. Refunds will not be issued due to minor fitment issues. All parts are for off-road and show use only.

Painting VIS Racing Aerodynamics Products

VIS Racing brand aerodynamics will follow traditional FRP (fiberglass) preparation where every visible inch of the finish will need to be sanded to eliminate any blemishes including gelcoat chips, scratches, pin holes etc. By block sanding the finish you will be able to see the straightness of the product as well as anything that will need to be glazed with finish body filler. The finish on VIS Racing brand aerodynamics is just a basic primer coat that was used to help the part pop free from the mold when it was originally laid up. This is not a surfacing layer intended to be directly painted or to be installed without paint as it lacks UV protection. The more time spent on prep the better the finished install and quality of the paint job will be. Once the part has been totally prepped we suggest using a high build primer suitable for FRP to be sprayed and wetsanded before the base coat and clear coat is applied. High build primer will provide a thickness of finish applied on top of the part that can be easily sanded and checked for perfection.

About VIS Racing

VIS Racing Sports, Inc. has been at the forefront of automotive restyling since 1996. We started the ultra-aggressive style in body kits for sport compact cars in Southern California. The trend quickly spread from the West Coast to East Coast. In a matter of a few years, our styles can be found in many parts of the globe. This trend culminated with the release of the movie, "Fast and Furious" (2001), in which we were one of the primary sponsors. We were not content with the status quo and continued to bring new products to the restyling scenes. Our carbon fiber hoods and trunks are the de facto standard Grade A against which other competitors in the world are measured. Our carbon fiber products are number one in the industry, and their popularity can be seen on the streets as well as car shows alike. We are also making inroads into the Japanese market with the help of our partner in Japan. Our products can be seen in Japanese magazines, such as Auto Fashion and Options magazines.

Our participation with Hollywood did not stop in 2001. On the contrary, it was just the beginning. We provided two fully modified 02 RSX and 03 Eclipse, with our patented GT Bomber Body Kits and Torque Body Kits; respectively, for the Warner Brothers movie, Torque (2004). The beginning race sequence shows these two street demons racing on the highway. Our latest partnership with Hollywood can be seen in Lindsay Lohans Herbie: Fully Loaded (2005), in which our patented GT Bomber body kit and EVO style carbon fiber hood were featured on the 1997 Eclipse. On another front, our products are featured in numerous video games with racing themes, some of which include Electronic Arts Need for Speed: Underground 2, Juice, Forza Motorsport 1 & 2.

We at VIS have gone through many stages of growth, but none can be more drastic than the one we experienced in the year 2004. In 2004, we acquired Wings West, a name that should be familiar to anyone in the restyling industry. It was a much revered brand against which other competitors strived to be second.

We have expanded our warehouse from 45,000 square feet to over 100,000 square feet, our inventory is ample, and we strive to provide the fastest shipping possible. Any question feel free to contact us.