2018-2022 TOYOTA CAMRY SE / XSE (XV70) MONORS COILOVERS

Compatible With Toyota Camry SE / XSE (XV70) 2018 2019 2020 2021 2022; All Models Excludes 2.5L LE/XLE Trims
52mm Mono-Tube Steel Alloy Shock With 32 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track
Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories
Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Replace Or Rebuild When Worn Out
Full 1 Year Limited Warranty From Date Of Purchase; Install By Experienced Professional Is Highly Recommended

DETAILS

MonoRS Coilover damper kit by Godspeed Project are intermediate suspension upgrade setup for daily and Sunday club racing. Lowering your car with improved springs over factory and paired with Mono-tubo shocks with valving that allows 32 levels of rebound adjustment to improve handling without sacrifice comfort. Ride height can easily be adjusted by twisting the lower mount bracket. In order to keep weight gain at the minimum, most of attachments and accessories are CNC machined from billet aluminum. Koyo bearings are used when camber plate top mount is applicable depends on car models. To assure that our customers are getting high quality products, MonoRS coilovers are covered by 12 months limited warranty by the manufacturer from top to bottom just like other big brand name setups.

Features:

Improved Springs Rate To Help Ride Handling And Response
Valving Allows 32 Precise Levels of Rebound Adjustment
Koyo Japan 6204z Bearing To Improve Piston Strokes Smoother
Larger Capacity 52mm Mono-tube Shock Design, Anti-Corrosion Anodized Finished
Racing Grade Shock Oil With High Viscosity Index
Weight Saving Aluminum Components And Carbon Steel Lower Mount Brackets
Independent Ride Height and Spring Pre-load Adjustments
Where Applicable Front Camber Plates With Pillow-ball Top Mount for Camber Adjustment
1 Year Warranty from Date of Purchase

SPECIAL NOTES Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.
DAMPING LEVELS 32 Levels
HEIGHT ADJUSTMENT Yes
SPRING RATE(FRONT) 10 kg/mm (560 lbs/inch)
SPRING RATE(REAR) 6 kg/mm (336 lbs/inch)
SPRING LENGTH(FRONT) 180 mm
SPRING LENGTH(REAR) 220 mm
FRONT TOP MOUNT Yes, With Pillow Ball
REAR TOP MOUNT No, Reuse Factory Top
SPRING INNER DIAMETER(FRONT) 62 mm
SPRING INNER DIAMETER(REAR) 62 mm