2015-2017 Ford Mustang Clinched Widebody Kit
2015-2017 Ford Mustang Widebody Kit
Ford Mustang widebody kit by Clinched – wilder and wider than anything you’ve seen before! Fits 2015, 2016 and 2017 models. Click on “Description” to learn more.
Description:
Clinched 2015-2017 Ford Mustang widebody kit
S550 Mustang platform has been a big success for Ford ever since its introduction. Ford designers led by Joel Piaskowski found a way to make the body lines look more streamlined without losing Mustang’s signature masculinity. Our kit is for those looking to stand out from the crowd and those looking for more aggression than the stock S550 Mustang provides. This kit is not for the faint of heart as it amplifies Mustang’s design language and also gives you ability to run much bigger wheels and tires.
Adds 3.6 inches(9cm) up front and 4.7 inches(12cm) out back per side.
Parts included in the kit:
– Set of front and rear fender flares (4 pcs);
– Front add-on lip (2-piece design) – mounts to the stock front bumper;
– Front bumper flares;
– Sideskirts (2-piece design);
– Ducktail spoiler (could be sold without a spoiler for customers looking to use other type of rear spoiler);
– Rubber gasket;
– Installation hardware
This Ford Mustang widebody kit is superior to most of the kits out there as it’s offered in 2 choices of premium materials – either in ABS plastic or in carbon fiber. You won’t have to pay thousands of dollars in labor to your body shop to make it “fit”, like with any fiberglass kits. Unlike fiberglass, our parts won’t crack and will have a much longer lifespan. Most of the original equipment bumpers are made out of ABS plastic and there’s a reason for that – parts made out of ABS plastic are very heat, chemical and impact resistant and they require the least amount of prep work prior to installation.
Our partners @ Pazi Performance were able to complete 3 Mustangs for SEMA Show in just 3 (long) days. This feat would’ve been impossible to pull off with fiberglass parts since they require much more prep work.
Carbon fiber version comes with a hard “dry” carbon fiber surface for that “motorsport” look and ease of installation. You may also opt to have it painted or clear coated.
Fitment:
Our Ford Mustang widebody kit will fit all variations of S550-bodied (2015 through 2017) Ford Mustang. The kit will fit both coupe and convertible bodystyles of GT and EcoBoost models. It will also fit GT350 and GT350R with some additional custom work on the front bumper flares (some minor trimming is required).
This 2015-2017 Ford Mustang widebody kit comes with mounting hardware (Type 3) and rubber gaskets. For those customers looking to mount the kit with different style of hardware we offer a choice of Type 1 and Type 2 mounting hardware. The type of mounting hardware is nothing more than a personal choice.
Please note – you will need to cut your existing fenders and quarter panels. We highly recommend professional installation, although some of our clients have been successful with DIY installations.
All parts come in unpainted black ABS plastic. You can paint the kit or have it wrapped. In either case, you will need to primer the parts first.
Wheels & Tires:
www.willtheyfit.com is a good first step to figuring out possible wheel and tire combos.
As a point of reference – a now-infamous satin black Mustang as seen @ SEMA ’17 is running 20×13 wheels (negative 50 offset) out back with 315/30/20 tires and there’s TONS of room left on the inside. You can run 345/25/20 tire on a 13.5 ET-44 wheel.
Front wheel size is 20×11.5 ET-45 and the optimal tire size is 295/30/20 or 315/25/20.
| Weight | 80.00 lbs |
|---|---|
| Parent Product Type | Body Kits Aerodynamics |
| Product Types | Body Kits |
| Product Material | ABS Plastic |
| Brand | Clinched |
| Make | Ford |
| Model | Mustang |
| Year | 2015, 2016, 2017 |
Aerodynamics Product Disclaimer
We want all consumers to know that there will always be minor sanding, shaving, cutting, and/or filling prior to installing FRP (fiberglass) parts. The primer and or gel coat finish must have every square millimeter completely sanded and other prep work will be required prior to painting.
Please see our paint & installation guides by clicking the links below.
Aerodynamics Basic Paint Preparation Process
Aerodynamics Advanced Paint and Installation Guide
Our customer guarantee is that you can return your item within 30 days of receipt for any reason as long as it is returned in new condition in the original packaging and you pay for all shipping charges; original shipping fees are non-refundable. Products are non-refundable if altered in any way. Products are non-refundable if they are returned damaged in any way so be sure to properly repackage and insure your return shipment. It is recommended that the part be installed by a professional body shop that has experience working with aftermarket fiberglass and urethane body kits. Paint and installation process will include but are not limited to sanding, shaving, cutting and filling. Extra fees usually will be incurred for proper fitment, prep work etc. Refunds will not be issued due to minor fitment issues. All parts are for off-road and show use only.
For any order that is requesting a return within 10 days of delivery no restocking fee is due.
For any order that is requesting a return 11-30 days after delivery will be subject to a 25% restocking fee.
Delivery Inspection Procedure
- **Oversized Freight Delivery Requires Inspection Upon Delivery (Tractor Trailer Shipments Only)
- **It is extremely important to follow these instructions exactly to ensure that your shipment will be covered by the damage insurance.
When the shipment arrives, please be sure to thoroughly inspect the box and its contents for any major damage to the parts. You must unpack the order and remove each item from the box to check for concealed damage. If you do find damage to any of the items, please physically write "Damaged" on the delivery bill. Do not write anything else other than "damaged" on the delivery bill as it can affect the outcome of a claim decision by the shipping company. You will then accept the shipment as is, and notify us immediately. We will ask for digital pictures to verify that damage has occurred as it will be needed for processing the claim. In the instance major damage has occurred, we will file a damage claim with the shipper and ship you new parts as soon as they are available.
**Please note that if a product is damaged in transit and it was not inspected at delivery and not noted so on the delivery bill, we will be unable to assist beyond that point. Once the customer signs the bill of laden the shipping company will not allow us to submit a claim on your behalf.
**For orders shipped to a body shop it is your responsibility to contact them prior to delivery to ensure they inspect it before signing for it. If your body shop signs for the package without inspecting its contents for concealed damage we will not be able to file a claim for you with the shipping company.
**Do not discard any of the packaging or plastic wrap when a damage shipment occurs. We will need images of the box as well as the internal packing. We will also need image of the part # label that may appear on the part or bagging if applicable.
I agree that I will inspect the item at delivery and fully understand that if I do not inspect this item at delivery and unbox it at a later time to find concealed damage that I waive all rights to file a damage claim on the delivery insurance. I also fully understand that a damaged item cannot be returned for refund or store credit under any circumstances.