2012-2015 Honda Civic Si 420CC Injectors
Part#:
22S-05-0420-4
Details
Fitment
Set of 4 420cc Injectors for Honda Civic Si 2012-2015, Acura TSX 2009-2014, and Acura ILX 2013-2015
Description
These injectors are designed to fit the stock manifold only for the years shown above. They will not fit intake manifolds from prior years.
If you have a vehicle with an intake manifold swap from a prior year, please check out our Bosch injectors and electrical connectors.
All DeatschWerks injectors feature the following:
E85 compatibility
Flow rates and set balancing in-house by DeatschWerks
Flow balanced to within 1-2% (flow report included)
Excellent spray pattern and atomization for optimized idle and tuning
Technical assistance and tuning data available via phone or email
3-year comprehensive warranty
Injector Data
SpecsFlow RateBattery Offset
Fuel Pressure Range 40-100 psi
Minimum Pulse Width 1.1 ms
Maximum Duty Cycle 92%
Coil Impedance 14.2 ohm
Injector Type Denso
Top Feed Connector Type Sumitomo
Nominal Static Flow Rate PSI > 43 58 70 80 90 100 cc/min 438 502 568 605 648 691 lb/hr 41.7 47.8 54.1 57.6 61.7 65.8
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number.
All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.
Offset in Milliseconds (Pressure vs Voltage) PSI > VOLTS v 43 58 70 80 90 100 8
2.10 1.83 2.29 2.94 3.52 4.26 9
1.54 1.60 1.83 1.94 2.55 2.95 10
1.03 1.24 1.59 1.70 2.04 1.90 11
0.93 1.10 1.35 1.50 1.61 1.74 12
0.84 1.01 1.23 1.22 1.44 1.57 13
0.62 0.89 0.91 1.14 1.23 1.33 14
0.49 0.72 0.79 0.90 1.11 1.18 15
0.40 0.57 0.72 0.80 0.96 1.07 16
0.29 0.30 0.57 0.69 0.80 0.98
More Information
Weight | 5.00 lbs |
---|---|
Parent Product Type | Performance Upgrades |
Product Types | Fuel Injectors |
Brand | DeatschWerks |
Make | Honda |
Model | Civic |
Year | 2012, 2013, 2014, 2015 |